Get Quote

Phone Number


MS Series Marine/Industrial Sounders

  • 8 watt, 114dBa @ 1m output
  • 15watt, 117dBa @ 1m output
  • 25watt, 123dBa @ 1m output
  • Onboard choice of 15 tones
  • Remote tone selection
  • Dual cable entries
  • Integrated DC and AC voltages
  • Short horn version (8W)
  • Watertight to IP66/IP67


Cut Sheet
PDF CS_MS-Series.pdf 274K




MS Series Marine/Industrial Sounders

Federal Signal's model MS Series Sounders and Powered Loudspeakers are designed for rugged industrial applications where CE certification is required. The MS Series is comprised of two separate products that serve a variety of applications. First is a sounder that includes fifteen standard tones with a common power input that accepts an AC or DC power source. Once power is applied, a single tone may be selected through the use of a remote contact input, or all fifteen tones may be accessed independently by providing a binary string of information, specific to each tone. This allows a certain sound to match a specific alarm condition.

The second version of the MS Series is a powered loudspeaker. Once an AC or DC power source is applied, the powered loudspeaker is capable of amplifying a low level audio signal, and reproducing it at 8, 15 or 25 watts, depending on the model selected. MS Series Powered Loudspeakers are the perfect option for ECHO Intercom systems, where CE approval is required.

The Model MS Series sounders and powered loudspeakers are available in three different configurations, from 8 Watts to 25 Watts, to provide an appropriate amount of sound for the ambient environment. To fine tune the product for each application, an internal volume adjustment potentiometer is provided.

Mounting is provided by a stainless steel ratcheted mounting bracket that locks the sounder in position at a specific angle without slipping. The bottom surface of the mounting bracket also contains three mounting holes, to adapt to a variety of surfaces.

The MS Series is rated for IP66/67 through the use of a neoprene "O" ring seal. All exterior cast aluminum surfaces are finished in gray powder coat paint and external hardware is manufactured from stainless steel to resist corrosion.

  Description
  Parts
  Agency
  Diagrams
  Specs
  Ordering Info










Credit Cards